www.chopcult.com
You should buy one...
Here's an 02 Bobber for $5900, from Lakewood, CA.
Ad says:
2002 Honda 600-cc, engine only has 1,970 miles runs perfect, rigid set up, new candy paint (pictures don't do it justice) new tires, new bars, custom seat with 3" springs, electric start, all other useless stuff removed, bike is super clean and ready to ride.
Here's a 1981 Yamaha XS650 Hardtail Chop - Tagged, Titled & Running great - $2500
This bike is 100% complete and needs nothing besides a new owner. It has been ridden daily for the last 6 months and has made numerous 2-300 miles trips without a hitch. I built the bike from stock, so I know everything about it and can answer all questions.
This bike is not for everyone! It is currently operating without a front break (I have stock parts to bolt brake back on) and is kickstart ONLY! It is a 1-3 kick bike ALWAYS and has never let me down. It leaks oil from the clutch pushrod seal like most XS’ do, but can be fixed with a $4 seal from MikesXS.com… I’ve just been too busy riding it to fix it! This bike is not a trailer queen or a show bike. What it is, is a respectable, garage built bike, with some great parts and tried and tested reliability.
1981 Yamaha XS650
*Frame custom hardtailed professionally in a jig, by a reputable source. This is a one off design, by me. Not your typical pre-fabbed weld-on piece. 0 stretch and 4.5" ground clearance with TC Brothers axle plates. Stock wheelbase makes for a nice aggressive riding position.
*Motor is stock with all filters/oil changed. Valve covers are powdercoated as well as other bits and pieces. Around 13k miles on the motor.
*Transmission shifts great, no issues.
*New chain and sprockets. Rear sprocket reduced from 34 teeth to 32 making it great for cruising at freeway speeds.
*Stock electronic CDI ignition, nice and reliable
*Custom wiring all hidden within a custom electronic box.
*BS34 Carbs with Heiden DynoTune kit
*1.75” modified Omars Dirt Track Half Mile Pipes
*Deep tunnel Wassell knockoff tank with flame paint
*Numerous Flyrite Choppers parts including: Seat, fender, fender brace
*Bates style sidemount headlight, custom headlight ears powdercoated.
* XS650 19” front wheel, 16” rear with tires that were put on this year.
*Mounting hardware, bungs, tabs etc. from Lowbrow Customs
No comments:
Post a Comment